Toyota Tundra Truck Tonneau & Bed Accessories
Vehicle Accessories to Enhance and Protect.
 | Pup-Hut-
NEW PRODUCT!!! PUPHUT® the innovative truck-bed shade and shelter product for dogs.
PUPHUT® fits most full size pickup trucks.
PUPHUT® is made with a heavy coated vinyl (the same material used on big rig truck tarps and commercial building awnings) It will withstand wind, rain, heat and exposure to the elements The frame is constructed of heavy tubing with a black powder coated finish for long-lasting weather resistance
PUPHUT® can be installed on trucks with the inside measurements from bedrail to bedrail of 61.25" to 65.5".
When installed, it is 17" high from the top of the bedrail to the top of the PUPHUT® to accommodate large dogs and most commercially available pet crates.
3-Point Truck Restraint Now Included.
Shipping weight: 39 lbs.
Part numbers will show when added to cart.
|
 |
 | SHUR-TRAX
STOP SPINNING YOUR WHEELS!!
A safer alternative to add traction weight to your vehicle
From spring rains to winter snow, ShurTrax all weather traction products provide you with improved handling and control year round. You can add up to 400 lbs. of additional weight to your vehicle ensuring a safer and smoother ride for all road conditions. Our no hassle traction weight products come with a nozzle that attaches to your garden hose allowing you to fill it with water after you have placed it in the back of your vehicle. You can continue your daily activities including hauling items in your truck bed or car trunk since your ShurTrax can withstand up to 500 lbs. of weight.
What happens when the water in my ShurTrax freezes?
ShurTrax is durable enough to expand and contract during the normal freezing and thawing that occurs at and below 32- degree temperatures. We advise the consumer to fill ShurTrax with 3 inches of water as stated in the product manual, thus allowing sufficient room for expansion. The material is rated to withstand outdoor temperatures as low as -40 degrees Fahrenheit.
Will ShurTrax control "axle or wheel hop"?
Yes, very effectively. Adding 400 lbs. of weight to a half, three quarter or full ton pickup will definitely reduce axle or wheel hop.
How can I justify the cost of ShurTrax?
With proper care ShurTrax products should last at least five years. Even at Home Depot’s very low price of near $5 for a 60 lb tube sand bag, 6 bags per year, will cost you over $150 which is more than ShurTrax.
How much weight is added to the vehicle by ShurTrax?
Water weighs approximately 8 lbs. per gallon. This product is sized so the 3 inch suggested fill level will provide the following weight: LW-0036 = 100lbs; LW-0048 = 300 lbs; LW-0056 = 400 lbs. However, the consumer can add to or take away weight by adjusting the water level from 1-4 inches without harming the product.
Can I haul cargo on top of my ShurTrax?
Yes, the product is rated to withstand up to 500 lbs. of flat laying cargo. The only risk of damage would be if you placed sharp or pointed objects directly on the surface of your ShurTrax. The ShurTrax package warns the consumer of this risk.
Will ShurTrax slide around?
The water weight is sufficient enough to keep ShurTrax in place. However, "inching forward" during braking may occur so grommets have been molded into the design to allow you to strap or bolt your ShurTrax in place. We strongly encourage you to do so.
How durable is the material?
ShurTrax consists of two layers of material. The inner layer is a smooth water resistant material that provides a super high quality seal when molded together using RF (Radio Frequency) equipment. The outer layer is a very tough rot, mildew, and tear resistant material. This outer material consists of a woven nylon mesh through two layers of vinyl. The material is also rated to withstand outdoor temperatures as low as -40 degrees Fahrenheit (actual degrees, not wind- chill).
Can you explain the outer seal and baffles?
The outer seal is a very important part of the design. Dies were made allowing us to make one continuous outer seal and eliminate the use of seams. The baffles are also very important. The baffles prevent the water from surging or thrusting by keeping the water isolated inside four separate compartments.
What other uses are there for ShurTrax products?
Many of our satisfied customers report ride, handling and leveling improvements; transporting water for vacation, industrial and commercial purposes including use for agriculture; off-road traction; and controlling axle or wheel hop. Although ShurTrax is used for storage and transportation of water, it is not approved for drinking water (water is not potable).
What happens if I puncture my ShurTrax, and are there other accessories offered?
SealPak Innovations offers a specific Tear-Aid"Patch Repair" kit to service ShurTrax if there is a needed repair. A truly tough patch skin repair kit that makes patching your ShurTrax simple and secure. ShurTrax outer skin is plenty tough but is not immune to puncture. Patches are see thru and Peel & Stick.
Repair Kit Includes:
1 - 3" x 12" Patch,
1 - 1-3/8" x 1-3/8" Patch,
1 - 7/8" x 7/8" Patch,
1 - 36" Reinforcement Fillament for Seam Repairs, and
2 - Alcohol Prep Pads
There also is a "Siphon Pump" to aid in draining, a "Perfect Fitting" for ease of filling your ShurTrax and “Ratchet Buckle Straps” to assist in strapping your ShurTrax product in place.
ShurTrax comes with a 3-year warranty on all parts and labor. $5.00 freight on Tear-Aid if not purchased with Shur-Trax
Part numbers will show when added to cart.
|
|
 | Truck Cargo Gate / Tundra
The CARGO GATE is made from heavy-duty plastic, anodized aluminum, and stainless steel components.
It adjusts and installs quick and easy. The easiest way to keep your load secure!
Simply lift, lock, and load for a perfect cargo divider that goes from the bottom cargo area to the top walls with no assembly or mounting hardware required.Cross members are constructed of 1 x 1 anodized aluminum. The locating pins, clips and locking mechanism are of stainless steel. Landing pads and feet are rubber. Actual gate is heavy-duty nylon plastic.Will hold up to a 650pound static load. Is designed to hold items against the firewall or tailgate in a snug position.Installs by lifting the locking handle, adjust the landing posts to the nominal width of the truck bed via locating pins, and push the CARGO GATE against the bed floor so the rubber feet grip. Then depress the locking handle down until it clicks and you are ready to go.Once you adjust the landing post and press down the handle, the cam action forces the landing posts out - applying up to 300 PSI against the inside edge of the bedrails. Much stronger than the inner walls of the fender walls and provides a tremendous amount of resistance.Works with or without parallel ribbed bed liners, as well as with bed rugs. Also works with tonneau covers or camper shells as long as the CARGO GATE has the ability to contact the side rails without interference of the cover.Limited lifetime warranty to the original purchaser.
E: #1601 Adjustable Width adjusts 62" - 65 1/2", Height 22 3/4", Weight 8 lbs.
Choose E for: Toyota Tundra 2007&up (all models)
B: #1302 Adjustable Width adjusts 58.65 " - 63", Height 17", Weight 7 lbs.
Choose B for: Tundra (years 2006 or earlier, except Double Cab)
A. #1501 Adjustable 62" - 65 1/2", Height 19 1/2 inches, Weight 8 lbs.
Choose A 2004-2006 Tundra Double cab
Part numbers will show when added to cart.
|
|
 | Stowaway2 Truck Box
The perfect truck box for the bed of your pickup.
The STOWAWAY2 TRUCK BOX is easily removable from the bed when needed, and offers more cargo space than traditional truck boxes.
Plenty of room for your golf clubs,travel gear, tools, etc.
High impact polymer carrier is virtually unbreakable and warranted for five years
Steel latch locks for added security
Automotive grade weather seal helps protect your gear
Dimensions: 49” L x 21” W x 24” H
Capacity: 12.5 cubic feet and 200 pounds
Part numbers will show when added to cart.
|
|
 | Extang Trifecta Tonno / Tundra
The true leader in
engineered design
excellence. . . EXTANG
has more U.S.
patents than
all other
tonneau
companies
combined!
NEW EXTANG TRI-FOLD
TONNEAU
COVER
LIFETIME FRAME & 10 YEAR TARP WARRANTY
Saves Gas - Quickly Pays for Itself!
No Tools Required. Fast and Easy. Install by one person. No assembly Required.
Clamp down the rear panel SpeedKlamps™
and you’re finished. It’s really that fast!
Simply unfold tonneau.
Click here for installation instructions.
Place pre-assembled tonneau on truck bed.
Hand-tighten the Extang SpeedKlamps™
Extang’s extremely strong
glass-filled nylon constructed
SpeedKlamps™
offer both a rapid-secure
& rapid-release system
and no tools are needed.
Cab section SpeedKlamps™
secure by simply
tightening, by hand, the
threaded clamp with
built-in heavy-duty handle.
Tail section SpeedKlamps™
operate with springaction
technology for
instant fasten and release.
The clamps conveniently
stow away within the rail
when not in use.
The new Extang
MaxHinges™
are double pivot
hinges with
center link and
padded seals.
These Extang
engineered glass
filled nylon hinges are built to last. One of
the smallest, but most important parts of the
Trifecta tonneau system.
The Trifecta
tonneau cover
has 45 steel
corner brackets
that provide
unparalleled strength.
Extang’s commercial
grade rails and I-beam Monster Bows&trade are
secured with multiple reinforcements using
zinc dichromate, aluminum braces. Together
they offer the strongest, professional quality
tonneau that Extang Engineering is noted for.
Extang uses pro-grade labyrinth rail seals
that exceed OEM standards and provide the
best seal possible. Seals at all contact points
to protect the truck’s finish and keep out
the weather and dust. The permi-sealed tarp
is pre-attached to rails for a permanent seal
and no-gap fit.
The heavy
duty luggage-style Hold-Tite™ fasteners
are quick and easy to use and adjust. The
Hold-Tite™ straps
and snaps combination
allow the tonneau
to be fully open and
safely secured at the
cab while driving.
Best Looking...
Where engineering
ends, good looks
begins. This tonneau
system features a
rich looking all-black
frame. It has perfectly
sewn and tight
fitting, double layered vinyl with anti-curl
corners. Easy Quick Access
with Maximum
Truck Bed Usage
Accessory:
Keep it looking NEW with Extang Tonno Tonic
It cleans, beautifies and protects
tonneaus in 1step! Contains Powerful UV
protectant. Tonno Tonic is the only vinyl cleaner
and conditioner approved for use
on Extang tonneaus.
this item usually take one week to ship out.
Part numbers will show when added to cart.
|
|
 | Extang FULL TILT new Tonneau Cover / Tundra
ADVANCED FULLTILT™ Tonno Features:
Most advanced features of any tonno made.
Extang engineering gives a solid and secure feel as the hinged tonno is opened and closed:
Hinges at the front cab rail and not in the middle of tonno material avoiding tarp wear Front hinge allows maximum access to bed
Extang’s patent pending Quick Release™* and L-Rail™* System provide a no-measure installation that is accurate and very easy to do
L-Rails™* create a self-centering lid system that also prevents damage to the truck’s finish
Long centered handy pull strap for easy reach and a true level closing
Tarp can be rolled up and bows removed for hauling that unexpected large load home
Proven neoprene rubber padded TuffKlamp™ system...No damage...No drilling
Polymer covered handles do not scratch the truck or restrict cargo space like cross-bar latches
Automotive style sealing system:
- ribbed seal at rear tail gate.
- tubular labyrinth seals along sides
Aluminum tonno frame, spring-loaded Bows™ and ClickLock™ corners with steel TuffSnaps™—all state-of-the-art patented features that bring the best design to the ultimate hinged tonno system.
The finest quality and most solid construction. Extang engineered throughout.
PLUS:
THE BEST WARRANTY - 10 YEAR TARP AND LIFETIME FRAME - the best in the industry.
this item usually take one week to ship out.
Click here for installation instructions.
Works with or without rail system for Tundra
Part numbers will show when added to cart.
|
|
 | Extang Black Max Tonno / Tundra
The new all black look in tonneau covers features adjustable snaps that give you a tight fit in hot weather and a looser fit in cold weather.
Fact: Extang makes the world's only patented 4-way fully adjustable tonnos that work well in cold climates. Stud low for tight fit in hot weather. Slide off, flip over. Stud high for looser fit in cold weather. All Black Bows, Rails, and Cover.- The BLACKMAX™ frame corners feature quick release LEVER-LOCK™ attachment that stays securely in place and will not vibrate loose. Pull back the lever and the tail rail quickly unlocks for bulk handling. When the lever latches you know it is locked. All with one finger!
- Corners do not buckle up. Snaps and corners are backed with thick polymer forcing the corners and edges to lie smooth and look good in any weather.
- The MONSTERBOWS™ ends are spring loaded for easy installation. They will Never fall off at any speed or in the roughest driving conditions. Simply push and hold on one end and let the other end slide on using spring action.
- Adjust your bow height either high or low. The TUFFKLAMPS™ allow two bow heights for your convenience.
- MAXSNAPS™ are fiberglass reinforced nylon that makes the snaps strong and durable. Will not break
- SNAPSTOPPER™ keeps snaps on rail when tarp is rolled back.
- Tailgate easily opens with tonno installed.
- No drilling, No damage, easy installation. The MAXCARE Warranty by Extang: 3 year warranty.
Click here for installation instructions.
You will give your specific vehicle information on final order page.
this item usually take one week to ship out.
2007&up works with or without rail system
Part numbers will show when added to cart.
|
|
 | EXTANG new EXPRESS Tonneau Cover / Tundra
EXTANG engineered roll-top style tonneau easily installs in minutes!!
Built EXTANG Tuff with a custom tapered, all-weather design. Extang Express automatically keeps perfect tension in any season with their fresh spring-loaded Self-Adjusting Tension System
Pre-drilled siderails for a simple, no-measure clamp placement
Cool, low profile clamps are hidden out of the way beneath siderails
Quick Release Levers at tail and cab for loading cargo and complete bed usage
Over the rail, aerodynamic design provides maximum performance Repels water while IMPROVING M P G !!
Heavy duty, anodized aluminum rails and bows have a rich black finish Bows conveniently roll up within tarp for easy storage secured by strong luggage-style clips
Industrial style, aggressive high peel strength Velcro™ sewn into the heavy-duty vinyl tarp
WeatherTuff Seals provide the ultimate bed protection
Maximum Strength Warranty: Lifetime frame and tarp
Click here for installation instructions
2007&up works WITH OR WITHOUT rail system
Part numbers will show when added to cart.
|
|
 | Extang RT Tonno Cover / Tundra
Extang engineered roll-top (RT) style tonneau for the fastest, easiest access.
Very low profile offers a virtually flush fit and head-turning good looks
Opens & closes in seconds by just one person. Easy one finger tip release Bows are secured to tarp for easy roll-up Rolled tarp secures with heavy duty snap buckle. Fast & easy
Premium sewn, commercial grade tarp, with fully finished edges. Far superior to folded over vinyl. Quality you notice.
Scratch-resistant, heavy-duty silver anodized bows are prepositioned and attached to tarp to roll-up inside. No loose parts.
Fast simple D.I.Y. NO DRILL installation. Click here for installation instructions.
PerfectFit control at cab rail adjusts for hot/cold tarp tension
Heavy duty locking rear tail rail secures your cargo
Uses industrial style, aggressive high peel strength Velcro
Lifetime warranty on frame and tarp!
this item usually take one week to ship out.
This cover works with or without rail system
Part numbers will show when added to cart.
|
|
 | Extang Tonno Tonic
Extang introduces the industry’s first powerful UV protectant specifically formulated for vinyl truck bed covers.
Beautifies, Cleans and Protects all in One Step.
Uses the world’s most effective UV screening formula.
100% Safe for all vinyl tonneau materials regardless of manufacturer—the only cleaning solution officially approved for Extang tonnos.
Tested and approved by Extang—the leader in tonneau sales in America.
A must-have for harsh weather conditions.
Tonno Tonic™ can also be used on any other vinyl, rubber, fiberglass, plastic, or leather surfaces.
Also does an outstanding job on tires and will not harm alloy wheels.
Part numbers will show when added to cart.
|
|
 | Extang TUFF Tonno (replaces Saber) / Tundra
The TUFF TONNO COVER REPLACES THE FORMER SABER TONNO COVER.
Fact: All Extang products install quick & easy by one person with No drilling and No damage to your truck. TUFF COVER FEATURES:- New rotating rear-end rail engineered for easier fit and tighter, better looks.
-
New “SpringLock™” bows are easy to install and they’ll never fall off… at any speed!
- Corners don’t buckle up due to parachute grade nylon corner reinforcements.
- Snaps & corners are backed with thick polymer forcing the corners and edges to lie smooth and look good in any weather.
- Extang’s Monster Bows™ quickly spring on and off with no tools. It’s fast and easily done with one hand. The TUFFKLAMPs™ allow two bow heights: HIGH for maximum water shedding in harsh weather, and for improved gas mileage. LOW for sporty good looks and cold weather tonno attachment.
- Your tarp can be quickly rolled up and secured with strong convenient straps allowing you to haul large items.
-
NO drilling, NO damage! Fast install. No tools needed.
-
The TuffTonno gives you a clean, smooth side with it’s “peel & seal” strip edging and rear rail system.
-
New improved J45 strip is the world’s strongest tarp attachment.
- The Best Warranty: Lifetime Frame and 10 Year Tarp!
Click here for general install instructions on Tuff Tonno
^^2007&up works with or without rail system
EXTANG continues its’ race heritage with this highly improved TuffTonno.
The original TuffTonno set a world speed record at Indy and is now at the Indy Hall of Fame. Race pros choose Extang.
this item can take two - three weeks to ship out.
Part numbers will show when added to cart.
|
|
 | Genesis™ Hinged Tonneau / Tundra
This quality Bed Cover
is hinged to allow complete and easy access to your truck bed
Heavy Duty Gas Struts provide quick, one-hand opening
Unique Slam-N-Scram™ latch provides instant latching when closing the cover – No fumbling with additional latches Pre-marked rails and heavy-duty clamps assure quick, no drill installation
Limited lifetime warranty on frame and cover
Part numbers will show when added to cart.
|
|
 | Genesis™ Roll Up Tonneau / Tundra
Roll Up Bed Cover
Comes pre-assembled for an easy no-drill Installation in under 20 minutes General instructions click here. Double-sided fabric with attractive black matte finish is tear resistant and high quality
Constructed with black rails and bows with strong rigid extrusions that provide classy looks, high durability and easy operation
Automatic tension control with unique design built into latch, saving adjustment time
Unique adjustment gauges with +/- arrows saves time and provides for perfect alignment and tension on both sides
Unique corner caps on rail protect corners while providing an outstanding low profile fit and finish that goes unmatched
Heavy-duty velcro hook and loop fastener measuring 1.5-inches wide is securely fixed to side rail with durable adhesive allowing for easy opening and closing
Uniquely integrated multi-finned rubber seal on both front and rear rail protects from dust and moisture
UPSable
Limited lifetime warranty including both frame and cover
Part numbers will show when added to cart.
|
|
 | Genesis™ Seal & Peel Tonneau / Tundra
New!!Seal & Peel Bed Cover
Independent studies show use of bed cover improves gas mileage Unique seal and peel
snapless closure system opens and closes much quicker than traditional snap covers
Pre-marked rails and heavy duty clamps assure perfect, no drill installation in under 20 minutes
Superbly engineered cover and rails provide a perfect, no-adjustment fit in extreme climates
Integrated rear tailgate seal will not get knocked off like adhesive seals
Limited lifetime warranty on frame and cover
Part numbers will show when added to cart.
|
|
 | Genesis™ Tri-Fold Tonneau Cover / Tundra
Tri-Fold Tonneau Cover
Comes completely assembled and installs NO DRILL in under 2 minutes
Double-sided fabric with black matte finish is tear-resistant and of superior quality
All black rails and bows with strong, rigid extrusions provide classy looks, durability, and easy operation
Easy to use clamps with quick attach cam action design provide tension and security to the cover
Buckle style closure straps easily store cover in open position
Can be shipped via UPS Note: Over the rail bedliners will have to be cut for this tonneau cover to work. This cover can be used with bed rail and tailgate caps
Limited lifetime warranty on frame and cover
Part numbers will show when added to cart.
|
|
 | PRO-NET™ Pro Runner™ Series
Pro-Net™ invented the single piece tailgate net and is the recognized leader in quality, fit and finish.
Every Pro-Net™ features the patented high-performance, even-tensioning design that requires only four mounting holes to produce a perfectly flat, sag-free installation.
Budget priced Pro Runner model features our patented, balanced air-flow design and the patented Pro Net even-tensioning system. Constructed of 18 oz. vinyl-coated polyester fabric, with plated steel mounting hardware.
Available in black only
Full-Size - 18" H x 59 ľ" W
Compact - 15" H x 49 ľ" W
Accessories:
Speed Clips™ Stainless steel quick release clips allow for fast and easy access to your truck bed. Polished, engraved and loan tested to 600 lbs
$32.95
 |
|
 | PRO-NET™ Original
Pro-Net™ invented the single piece tailgate net and is the recognized leader in quality, fit and finish.
Every Pro-Net™ features the patented high-performance, even-tensioning design that requires only four mounting holes to produce a perfectly flat, sag-free installation.
For good looks and increased air flow through the truck bed, Pro-Net™ provides a selection of styles and colors to complement any pickup.
Performance Series Pro-Net™
Classic design available in two sizes, for full-size, mid-size and compact pickups. Constructed of heavy-duty 22 oz. vinyl-coated polyester fabric, with stainless steel mounting hardware.
Available in blue, red, black, white or gray
Full-Size - 18" H x 59 ľ" W
Compact - 15" H x 49 ľ" W
Accessories: Stainless steel quick release clips allow for fast and easy access to your truck bed. Polished, engraved and loan tested to 600 lbs
Free Bonus: Includes 4 Strap-Trap™ Strap Clips which securely holds webbing ends to prevent them from flapping around and possibly damage the pain. Precision injection molded in black ABS.
$45.95
|
|
 | PRO-NET™ Pro Flow™
Pro-Net™ invented the single piece tailgate net and is the recognized leader in quality, fit and finish.
Every Pro-Net™ features the patented high-performance, even-tensioning design that requires only four mounting holes to produce a perfectly flat, sag-free installation.
For good looks and increased air flow through the truck bed.
Pro Flow™ Flap-Vented Pro Net Patented vent-cut design allows nets to be silk-screened with eye-catching, wall-to-wall graphics.
Vents open and close while driving for gas saving air flow.
Constructed of heavy-duty 22 oz. vinyl-coated polyester fabric, with stainless steel mounting hardware.
Available in U.S.A. flag or Canadian Maple Leaf.
Full-Size - 18" H x 59 3/4" W
Compact - 15" H x 49 3/4" W
Accessories:
Speed Clips™ Stainless steel quick release clips allow for fast and easy access to your truck bed. Polished, engraved and loan tested to 600 lbs
Free Bonus: Includes 4 Strap-Trap™ Strap Clips which securely holds webbing ends to prevent them from flapping around and possibly damage the pain. Precision injection molded in Black ABS.
$58.95
|
|
 | PRO-NET™ Specialty (Stepside or Flareside)
Pro-Net™ invented the single piece tailgate net and is the recognized leader in quality, fit and finish.
Every Pro-Net™ features the patented high-performance, even-tensioning design that requires only four mounting holes to produce a perfectly flat, sag-free installation.
For good looks and increased air flow through the truck bed.
Custom sized Pro-Net™ fits most full-size stepside and flareside pickups.
Constructed of heavy-duty 22 oz. vinyl-coated polyester fabric, with stainless steel mounting hardware.
Speed Clips™ Stainless steel quick release clips allow for fast and easy access to your truck bed. Polished, engraved and loan tested to 600 lbs
Free Bonus: Includes 4 Strap-Trap™ Strap Clips which securely holds webbing ends to prevent them from flapping around and possibly damage the pain. Precision injection molded in Black ABS.
Available in black only
Sportside / Flareside - 17" H x 45 1/2" W
$48.95
|
|
 | Sportz Truck Tent III (newest) / Toyota Tundra
Features of the New Sportz III Truck Tent........A NECESSITY for today's Camper, Hunter, Fisherman, or avid
outdoor enthusiast.
House style as opposed to a dome for more headroom
New upgraded, water-resistant nylon floor makes the tent lighter and easier to fold
A new color scheme is introduced – Royal Blue and Beige Sets up in minutes with shock corded fiberglass
poles
One large ventilation window on each side allows for greater airflow and circulation Constructed from durable P.U.coated nylon with shock-corded fiber glass polesAttaches under vehicle with stretch tension strapsComplete UV-TEX coating protects from ultra-violet rays Completely self contained with inner sides and floor Fly (6' x 6' awning that shelters from the elements) and camping sack includedThis tent includes tailgate coverage
1 year manufacturer warranty against manufacturer defects with normal use
Sometimes it’s good to be left high and dry! The #1 selling Truck Tent in America.
The SPORTZ III TRUCK TENT'S simplicity, light weight and compact size make it ideal for a
variety of situations
the below measurements for Toyota Trucks as indicated
Fit measure inside bed (box) of truck to end with tailgate up. Does not fit T3 Tundra model.
this item normally ships within 2 working days of placing the order
IF ORDERING FOR SHIPMENT TO CANADA ORDER FROM LOWER LISTING. There is a 20% surcharge on Canadian order on all Sportz Tents.
Part numbers will show when added to cart.
|
|
 | Sportz Truck Tent III camo/ Tundra
Sportz Camo Truck Tent III
The Truck Tent Specialists have done it again! Napier Enterprises is excited to showcase their ingenious Sportz Camo Truck Tent III! Especially designed for hunters, this innovative tent keeps you high and dry and is now 30% larger!
Set-up camp wherever the hunt takes you, finding the perfect campsite is no longer an issue!
Sometimes it’s good to be left high and dry!
The Sportz III CAMO is outfitted with the Advantage Timber Camo pattern.
FEATURES:
patented sewn-in floor
large ventilation windows
advantage timber pattern
comes with full rain fly
light weight and easy to roll/pack
1 year manufacturer warranty against manufacturer defects with normal use
this item normally ships within 2 working days of placing the order
IF ORDERING FOR SHIPMENT TO CANADA ORDER FROM LOWER LISTING. There is a 20% surcharge on Canadian order on all Sportz Tents.
Fit measure inside bed (box) of truck to end with tailgate up, does not fit T3 Tundra model
Part numbers will show when added to cart.
|
|
 | Truck Tent Mattress
This PVC, flocked top air bed creates the ideal sleep conditions away from home.
This comfortable e-coil mattress is available in a variety of sizes to suit your needs.
A quick and convenient Built-In Pump eliminates the need for a bulky external pump.
The ULTIMATE COMPANION TO THE SPORTZ TRUCK TENT
Double: 74"L x 54"W x 5"H
Twin: 74"L x 39"W x 5"H
Part numbers will show when added to cart.
|
|
 | zPop-UP Side Locker Rails by Putco / Tundra
POP IT UP - TIE IT DOWN design on these quality Putco Locker Rails allows you to use the tie downs when you need them and push them down when you don’t.
Secure your cargo by using POP-UP LOCKERS by Putco built into the LOCKER RAILS
Easy no drill, stake pocket installation with all hardware and instructions included
Made of 304 Stainless Steel tubing with a mirror finish and the highest quality chrome-plated, zinc die-cast stanchion ends
Each tie down has the ability to secure up to 500 pounds Carries Putco
NeveRust™ lifetime warranty
item ususally ships within 3 working days
SPECIAL THIS MONTH FREE FREIGHT ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Part numbers will show when added to cart.
|
|
 | zPush Up-Tie Downs by Putco
With These PUSH UP TIE DOWNS the post POPS UP with a patent pending cam system that is activated by Pushing in on the post for the up position and back down on the post for the hideaway position. Each position is locked into place.
One size fits all applications with stake bed pocket holes.
Zinc die cast part with 3mm OEM quality chrome plating.
Tie-down strength rated at 1000 lbs per tie down kit. Sold as a pair.
The easiest to install, the strongest tie-down strength and the highest quality mounting system available.
NO-DRILL installation utilizes Putco's technology.
Available in Chrome Plated or Black Powder Coated Finish.
Part numbers will show when added to cart.
|
|
 | zPutco BOSS Locker Side Rails / Tundra
Gives your truck the BOSS LOOK.
NEW IMPROVED DESIGN PUTCO BOSS LOCKERS
43% Larger than the original Locker Side Rail with a 2 1/2 inch diameterMade of NeveRust Stainless Steel and carries Putco's NeveRust™ Stainless Steel Lifetime Warranty
Easy no drill installation via bed stake pockets, installs in minutes
Solid die cast construction allows for extreme tie down strength
usually ships within 48 working hours after placing order
SPECIAL THIS MONTH FREE FREIGHT ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Part numbers will show when added to cart.
|
|
 | zPutco Locker Side Rails Tundra (Black)
THE NUMBER ONE SIDE RAIL IN THE COUNTRY......with Putco's factory lifetime NeveRust™ Warranty. All are made from 304 Stainless Steel.Both ends provide tie downs for securing loads in the bed of your truck.Available in 2 styles: Stainless Steel, or Black Powder Coated Stainless Steel.Easy NO-DRILL installation via stake pockets.Solid Die Cast construction allows for extreme tie down strengthNew Rail End includes Full Coverage O-Ring that protects against corrosion.Putco's NeveRust™ Warranty
Sold as pairs
Putco #1 selling Side Rail!
SPECIAL THIS MONTH FREE FREIGHT ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Colors/Options:
lrBlackPowdercoat |
Part numbers will show when added to cart.
| Item | Price | Shipping | Qty | Options | |
|---|
|  |
|
|
|
|
|
|
|
|
|
| zPutco Locker Side Rails Tundra (Stainless)
THE NUMBER ONE SIDE RAIL IN THE COUNTRY......with Putco's factory lifetime NeveRust™ Warranty. All are made from 304 Stainless Steel.Both ends provide tie downs for securing loads in the bed of your truck.Available in 2 styles: Stainless Steel, or Black Powder Coated Stainless Steel.Easy NO-DRILL installation via stake pockets.Solid Die Cast construction allows for extreme tie down strengthNew Rail End includes Full Coverage O-Ring that protects against corrosion.Putco's NeveRust™ Warranty
Sold as pairs
Putco #1 selling Side Rail!
SPECIAL THIS MONTH FREE FREIGHT ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Colors/Options:
lrStainless |
Part numbers will show when added to cart.
| Item | Price | Shipping | Qty | Options | |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
 | zPutco Rocket Locker Side Rails / Tundra
ROCKET LOCKERS for a powerful, cool, safe look are
synchronized to operate with Brake Light, Running Lights, Turn Signals, and Hazards.
Wired for clamp on power hookup to existing tail light wiring Front end of rail looks just like the traditional locker rail
No DOT approval necessary
Ultra Crystal clear lens with a clear LED diode that emits a red wavelength for the rear tail light functions Made of 304 Stainless Steel tubing and the highest quality chrome-plated, zinc die-cast stanchion ends with a quality mirror finish
Tie down locations hold the toughest loads and have a capacity of up to 500 pounds per end
Easy no drill installation via stake bed pockets includes all mounting hardware and easy installation instructions
Solid die cast construction allows for 500lb. tie down strengthNeveRust stainless steel carries Putco's NeveRust™ Lifetime Warranty
item normally takes about 3 working days to ship
SPECIAL THIS MONTH FREE FREIGHT ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Part numbers will show when added to cart.
|
|
 | zPutco SSR Locker Side Rails / Tundra
THE ORIGINAL economically priced Putco Locker Side Rails. Custom Fit Putco's patented custom-fitted SSR Locker Side Rails are made model specific for great fitting bed rails.
Made of 304 NeveRust Stainless Steel tubings. Truck bed side tube rail is 1-3/4 inch in diameter
Easy no drill installation via bed stake pockets, installs in minutes Note: (drilling is required if your pick up does not have stake pockets)
The Best Value priced side bed rail with a solid die cast construction.
Lifetime Warranty: Putco Locker Side Rails will never rust and are backed by Putco's Neverust™ lifetime warranty No tie down points on this rail
Best Value Item
SPECIAL THIS MONTH NO SHIPPING ON THIS ITEM
NO LOCKER RAILS FOR TUNDRA ACCESS CAB
Part numbers will show when added to cart.
|
|
|
|
View Cart •
Order Status •
Ordering Info •
About •
Contact Us (1-800-977-5350) •
Help
